Description

The Smart Auto Brake Sensing Light Bicycle Wireless Turn Light is the perfect way to stay safe while cycling through unlit areas at night! Simply install it on your bike’s handlebars, and switch between different lighting modes with one of four buttons.

Features

• Name: Bicycle Rear light,
• Remote Bicycle Tail Light Brightness: 100LM
• Warning LED: RED flashing
• Battery: 2000mAh
• Laser distance: 5 meters
• Light source: 29 LEDs SMT (everlight chips)
• Weight: 0.29 kg
• High quality remote control LED directional light is used for night use, such as cycling, baby carriage, jogging, walking, road emergency and camping. Wireless remote control Installed it on the handlebar, easy to switch the lighting modes of the bike rear light by press the four buttons on the controller.
• Total six lighting modes: (Steady with full brightness/ Fast Flash/ Flowing Light/ Turn Left/ Turn Right/ Ground Line).catch more attention at night to keep you safe! Auto brake light & ground warning line The light will highlight to remind the cars and pedestrians behind you when braking. Unique ground warning lane warns any possible incoming vehicle, providing riders with their own virtual lanes to further increasing visibility. Ultra-bright LED bike tail light MEILAN X5 bike tail light have 30 high-end LED lights and the brightness up to 85 LM, it’s bright enough to be seen from 150ft away in foggy/rainy day or even in dark night. IPX4 Waterproof Made of an waterproof plastic casing, it can effectively protect this product from rain damage.
• Note: It may not be suitable for use in heavy rain, please plug the USB cover if use in the rain. USB rechargeable Built-in a 2000mAh rechargeable battery, keep running for 5-8 hours under the flashing light mode after fully charged. The remote controller equipped with a CR2032 replaceable coin cell battery and it can keep working for 12 months.
• product information:LED007A
• Name: Bicycle Rear light,
• Remote Control Bicycle Direction Lamp Brightness: 50LM
• Irradiation distance: 100 meters
• Warning LED: RED and BLUE flashing High quality remote control LED directional light is used for night use, such as cycling, baby carriage, jogging, walking, road emergency and camping. Its directional flashing indicates that night travel safety factor is greatly enhanced.

Characteristic:

•  wide visual range.
•  easy to install.
• use the built-in 500mAh Rechargeable battery; working time:4-5hours
•  surface waterproof effect reaches IPX2,guarantee daily use.
• high quality LED, guarantee the warning effect.

Functional

• RED and BLUE flashing Bicycle light function:
• Remote Control: A total of 3 buttons
• The left turn key: Press the left turn button ,the button indicator flashes, and the rear left turn indicator flashes, and then press the button to turn off the indicator light.
• Right turn key: Press the right turn button, the button indicator flashes, and the rear right turn indicator flashes, and then press the button to turn off the indicator light
• LED light key: press the LED button, the button indicator is always on ,and the red light in the tail lamp is always on. Press the LED button again, the button light flashes, and the red light in the rear light blinks. Press the LED button for the third time, and turn off the red light on the tail light 
• Tail lights: a switch button, red LED warning light, yellow LED indicator light.

Matters needing attention

• Do not disassemble and refit without permission. This product only protects against rain. Please don’t immerse it in water.
• After use, please turn off the tail switch button, to avoid battery leakage of electricity.
• Pay attention to the battery is not allowed to replace by self.

Specifications

• Product information: LED008A
• Name: Bicycle Rear light, Remote
• Bicycle Tail Light Brightness: 100LM
• Irradiation distance: 100 meters
• Warning LED: RED flashing
• Size: 85x22mm
• Weight: 30g
• Battery: 500mAh
• Material: ABS+Metal Light charging time is 2 hours, a full charge can last 2~3 hours Main Light Function Control:
• -Click: Main light is on, entering the long-time lighting mode. Click again to enter the slow flashing mode. Click again to enter the fast flashing mode. Finally, click it to turn off the main light
• -Left button: Click, the left turn signal light flashes 25 times
• -Right button: Click, the right turn signal light flashes 25 times
• Product information:LED009A
• Name: Bicycle Rear light,
• Remote Bicycle Tail Light Brightness: 85LM
• Irradiation distance: 100 meters
• Warning LED: RED and YELLOW flashing
• Battery: 2200mAh
• Material: ABS+Metal High quality remote control LED directional light is used for night use, such as cycling, baby carriage, jogging, walking, road emergency and camping. 5 modes can be switched at will, left turn mode, right turn mode, flashing mode, braking mode, constant light mode packing list, installation method

The shipment of your product is our highest priority and everyday we dispatch hundreds of products to satisfied customers across the world. However, because the majority of our warehouses are China-based, our shipping and handling times can vary and we are therefore unable to offer next day delivery.

Processing time: As soon as we receive your payment, we immediately dispatch your order to our suppliers for order verification, tailoring, quality check and packaging which can take an additional 1-4 days.

Shipping time: This refers to the time it takes for items to be shipped from our warehouse to the destination. For US & Canada the deliveries typically take 7-15 days, United Kingdom 5-10 days, Australia 6-12 days, France 6-12 days, Italy 7-15 days.

For other international deliveries the shipping time may vary.

Tracking: As soon as your order is shipped, you will receive a confirmation email containing a tracking number allowing you to easily locate your product directly from our website at any time . Please note that while the majority of our shipping companies provide a tracking service, we cannot guarantee it in all cases.